Sterling 05/R Manuel d'utilisateur

Ope ra ting In struc tionsSing le Con vey or UnitSSV 05/R506-4MSSter ling Ma te rial Pro cess ing

1.3. For your safety·The op er a tors of this unit must be at least 16 years old.·Be fore ini tial op er a tion, read this op er at ing man ual

·Do not carry through mod i fi ca tions, at tach ments or al ter ations of the unit with outthe man u fac turer’s per mis sion. Dan ger of accide

·At tach ments which are not de liv ered by Ster ling must be con structed ac cord ingto the safety stan dard EN 294. Dan ger of ac ci dents!·Check al

1.4. For the safety of the units·The unit may only be used for con vey ing cy lin dri cal plas tic gran ules and regrindon in jec tion mould ing ma

2. In stal la tion in struc tions»These in stal la tion in struc tions are in tended for per sons withskills in elec tri cal and me chan i cal

2.1. Gen eral in for ma tionUn pack all parts of the sin gle con veyor unit and make sure that ev ery thing isavail able:·con veyor hop per with leve

2.2. In stall ing the con veyor hop perThe sin gle con veyor unit is not sen si tive to shocks and can be in stalled di rectly on the pro cess ing

2.3. In stall ing the con trol and main te nance unitIn stall the con trol and main te nance unit at afreely ac ces si ble site. Ob serve the len

2.4. Con nect ing the com pressed-air sup plyCheck com pressed-air pip ing for cor rect in stal la -tion and as sem bly.Check fit tings, length and

2.5. Elec tri cal con nec tion»Ob serve the reg u la tions of the lo cal elec tric ity board.The op er at ing volt age is 230 V, AC, PE, 50/60

Tech ni cal ser vi ce:Ser vi ce de part mentTele phone: (800) 423-3183Edi ti on: 08/99506-4MSSSV 05/R2This operation manual is for*:(* Please fill

3. Func tional de scrip tion»This func tional de scrip tion is in tended for the op er at ing per son -nel of the equip ment.Gen eral knowl edge of

3.1. Method of func tion ingThe sin gle con veyor unit works ac cord ing to theventuri prin ci ple. An ex ter nal com pressed-airsup ply is needed

4. Set-up»This chap ter is in tended for the op er at ing per son nel of theequip ment.Gen eral knowl edge of op er at ing con veyor units is p

4.1. Prep a ra tionsCheck whether the in jec tor tube is in serted in the ma te rial to be con veyed.Switch on the com pressed-air sup ply.Switch on t

4.2.1. Fine ad just ment of the fill ing level in the con veyor hop per&Be fore the fine ad just ment, carry through a ba sic ad just -ment.Dur in

5. Main te nance»This chap ter is in tended for per sons with skills in elec tri cal andme chan i cal ar eas due to their train ing, ex pe ri en

LDis con nect the equip ment from mains sup ply be fore start ingmain te nance pro ce dures to en sure that it can not beswitched on un in ten tion

5.1. Main te nance in ter valsdaily: Check the set ting of the pres sure re ducer.Empty the wa ter sep a ra tor.Check the dan ger signs on the uni

5.2. Clean ing/re plac ing the fil ter car tridge»Switch off the unit.Dis con nect the mains plug.Dis as sem blyRe move the fil ter car tridge (A).

As sem blyAs sem ble the sieve and the seal ing ring.Check the sieve for proper fit.Clean the hop per loader by means of a vac uum cleaner.Close the h

Ster ling Ma te rial Pro cess ing re tains all rights to chan ge the in for ma ti on in the seope ra ting in struc tions at any time w

5.4. Trou ble-shoot ingProb lem Rem edyThe unit is not con vey ing and is not ac tive a, b, g, hThe unit is not con vey ing; the com pressed-air valve

6. Tech ni cal dataMax. per mis si ble shot weight of the in jec tion mould ing ma chine: ... 100 kg/h (with 0.6 kg/l)(220.56lbs/h) wi

6.1. Di men sion sheet506-4MSSSV 05/RTech ni cal data 31Di men sions and data are not bin ding. All di men sions are in mm (in.). All data are sub

6.2. Spare parts list506-4MSSSV 05/RTech ni cal data 32ADCB

Pos. Des ig na tion ID-No.A fil ter 98171sieve 29252seal ing ring 28628B con veyor hose 84426C level probe 85480D com pressed-air hose 88351Main te

Please note that our address and phone information has changed. Please reference this page for updated contact information. These manuals are obsolete

Tab le of con tents1. Sa fe ty in struc tions ...61.1. War nings and sym bols ...

6. Tech ni cal data ...306.1. Di men si on sheet ...316.2. Spa re p

1. Safety in struc tions»These safety in struc tions ap ply to all per sons within the range of ac tion of the equip ment.Please in form all per sons

1.1. Warn ings and sym bolsThe fol low ing warn ings and sym bols are used in these op er at ing in struc tions:»This sym bol in di cates dan ger to l

1.2. Ex pla na tions and in for ma tionVar i ous terms and des ig na tions are used fre quently in these op er at ing in struc -tions to en sure cla